1200 mm x 600 mm, a product of which we could not be more proud. After a lot of intensive brain work and physical effort, numerous hours spent in the test laboratory, countless night shifts, heated debate and many litres of coffee, we’ve finally achieved it: turning a visionary technology into a product capable of being mass produced and attractive at the same time.
HIGH ENERGY/PERFORMANCE RATIO (KWh/KWp)• better performance than crystalline silicon at low light and high temperatures
NARROW OUTPUT TOLERANCE (+2.5 / –0 W)
• Better field performance
• risk of reduced output is eliminated
• reduction in mismatch sortings
BLACK DESIGN EDGE SEAL TO PROTECT AGAINST THE ELEMENTS
• Reliable moisture and vapour barrier
• absolute insulation resistance through precise laser edge ablation
• aesthetic, homogenous appearance through the use of high-grade edge sealing material
LOWER OUTPUT VOLTAGE
• allows longer strings and lower system costs
FULLY AUTOMATED COMPLETE PRODUCTION – MADE AND DEVELOPED IN GERMANY
• reduces manufacturing costs whilst at the same time increases product quality
• further development of technology and reliability from renowned institutes
GUARANTEE
• 5 years on material and workmanship
• 25 years performance guarantee:
- on 90% of rated power in the first 10 years
- on 80% over 25 years
SAFEGUARDED COLLECTION AND RECYCLING PROGRAMME BY PV CYCLE
• the product was developed with the consideration of future recycling
• 100% collection and recycling of the modules at the end of their service life
• free of charge for the purchaser
CERTIFIED AND TESTED BY LEADING TEST INSTITUTES
• SGS Germany - IEC 61646 & IEC 61730
• MCS approval
• UL1703 [in the preparation stage]
• TÜV Rheinland [ammonia test, performance test]
• PI Berlin – damp heat plus negative voltage
TRIED AND TESTED, WELL ESTABLISHED MODULE FORMAT
• 1200 x 600mm lightweight 12kg module surface
• Outstanding use of space owing to the small module format
CX-Series
Data sheet
CX1 60-70, PDF
CX3 62-72, PDF
Product brochure
CdTe/CdS thin film
solar modules
| Mechanical parameters of the CX Series | |
|---|---|
| Length x width: | 1200 mm x 600 mm |
| Height: | 6.9 mm (21.0 mm including junction box) |
| Weight: | 12.0 kg |
| Front cover: | 3.2 mm glass |
| Rear cover: | 3.2 mm glass |
| Frame: | not applicable |
| Cell type: | Cadmiumtelluride / Cadmiumsulphide [CdTe/CdS] |
| Junction box: | protection type IP 65 |
| Bypass diode: | not applicable |
| Cable length: | 650 mm (+cable) / 850 mm (-cable) |
| Connectors: | Y-SOL4 |
Copyright by Q-Cells SE © 2012